Roberto Pantani
Roberto Pantani
Department of Industrial Engineering, University of Salerno (Italy)
Dirección de correo verificada de unisa.it - Página principal
Título
Citado por
Citado por
Año
Modeling of morphology evolution in the injection molding process of thermoplastic polymers
R Pantani, I Coccorullo, V Speranza, G Titomanlio
Progress in polymer science 30 (12), 1185-1222, 2005
2742005
Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: Assessment of structural modification and kinetic parameters
G Gorrasi, R Pantani
Polymer degradation and stability 98 (5), 1006-1014, 2013
1822013
PLA-ZnO nanocomposite films: Water vapor barrier properties and specific end-use characteristics
R Pantani, G Gorrasi, G Vigliotta, M Murariu, P Dubois
European Polymer Journal 49 (11), 3471-3482, 2013
1652013
Crystallization kinetics of virgin and processed poly (lactic acid)
R Pantani, F De Santis, A Sorrentino, F De Maio, G Titomanlio
Polymer Degradation and Stability 95 (7), 1148-1159, 2010
1432010
Crystallization kinetics and solidified structure in iPP under high cooling rates
I Coccorullo, R Pantani, G Titomanlio
Polymer 44 (1), 307-318, 2003
1332003
Influence of crystallinity on the biodegradation rate of injection-moulded poly (lactic acid) samples in controlled composting conditions
R Pantani, A Sorrentino
Polymer Degradation and Stability 98 (5), 1089-1096, 2013
1312013
PLA/H alloysite Nanocomposite Films: Water Vapor Barrier Properties and Specific Key Characteristics
G Gorrasi, R Pantani, M Murariu, P Dubois
Macromolecular Materials and Engineering 299 (1), 104-115, 2014
1082014
Nucleation and crystallization kinetics of poly (lactic acid)
F De Santis, R Pantani, G Titomanlio
Thermochimica acta 522 (1-2), 128-134, 2011
1052011
Shear-induced nucleation and growth in isotactic polypropylene
R Pantani, I Coccorullo, V Volpe, G Titomanlio
Macromolecules 43 (21), 9030-9038, 2010
1002010
As‐molded shrinkage measurements on polystyrene injection molded products
KMB Jansen, R Pantani, G Titomanlio
Polymer Engineering & Science 38 (2), 254-264, 1998
971998
Thermal and hydrolytic degradation kinetics of PLA in the molten state
V Speranza, A De Meo, R Pantani
Polymer Degradation and Stability 100, 37-41, 2014
892014
Morphology evolution during injection molding: Effect of packing pressure
R Pantani, I Coccorullo, V Speranza, G Titomanlio
AIP Conference Proceedings 907, 969-974, 2007
852007
Spherulitic nucleation and growth rates in an iPP under continuous shear flow
I Coccorullo, R Pantani, G Titomanlio
Macromolecules 41 (23), 9214-9223, 2008
682008
Relevance of mold‐induced thermal boundary conditions and cavity deformation in the simulation of injection molding
R Pantani, V Speranza, G Titomanlio
Polymer Engineering & Science 41 (11), 2022-2035, 2001
652001
FTIR analysis of hydrolysis in aliphatic polyesters
M Partini, R Pantani
Polymer degradation and stability 92 (8), 1491-1497, 2007
642007
Molecular orientation in injection molding: experiments and analysis
R Pantani, A Sorrentino, V Speranza, G Titomanlio
Rheologica acta 43 (2), 109-118, 2004
592004
Analysis of shrinkage development of a semicrystalline polymer during injection molding
FD Santis, R Pantani, V Speranza, G Titomanlio
Industrial & engineering chemistry research 49 (5), 2469-2476, 2010
532010
Foam injection molding of poly (lactic acid) with environmentally friendly physical blowing agents
R Pantani, V Volpe, G Titomanlio
Journal of Materials Processing Technology 214 (12), 3098-3107, 2014
502014
Simultaneous morphological and rheological measurements on polypropylene: Effect of crystallinity on viscoelastic parameters
R Pantani, V Speranza, G Titomanlio
Journal of Rheology 59 (2), 377-390, 2015
452015
Development of a rapid surface temperature variation system and application to micro-injection molding
F De Santis, R Pantani
Journal of Materials Processing Technology 237, 1-11, 2016
442016
El sistema no puede realizar la operación en estos momentos. Inténtalo de nuevo más tarde.
Artículos 1–20